Jaw crusher is a good choice for coarse crushing of many materials. It is divided into PE and PEX series. It can be used for coarse crushing as well as fine crushing of materials. Medium-sized equipment is generally more commonly used.
Different users have different operational requirements. The reason why jaw crushers can firmly occupy half of the coarse crushing operations is closely related to their detailed model classification. The following will provide you with detailed answers to the commonly used jaw crusher model parameters and related quotation information.
Jaw crushers are available in various models and specifications, such as PE-250×400, PE-400×600, PE-500×750, PE-600×900, PE-750x1060, PE-900x1200, PE-1200x1500, etc. In different models, The crushers differ in terms of feed port size, maximum feeding particle size, discharge port adjustment range, processing capacity, motor power, and weight.
When it comes to commonly used jaw crusher models, we have to mention the more common production line scales. Output is an important consideration in choosing equipment models. In existing cases, 10t/h, 30t/h, 50t/h, 100t/h, 200t/h, 300t/h, 500t/h and other scales are relatively common. In these production lines, jaw crushers are basically used. We recommend these common models to you and introduce related performance parameters.
Do you want to know jaw crusher technical parameters details ?
Equipment model and capacity range
• There are many types of jaw crushers, and different types of stone crushers have obvious differences in production capacity.
• The smallest model of jaw crusher has a production capacity of 5-20t/h, while the largest model PE-1500×1800 coarse jaw crusher has a production capacity of 520-1100t/h.
• It can be seen that the adaptability of jaw crushers in production capacity is very wide.
Discharge particle size of jaw crusher
• The discharge port of the jaw crusher can be adjusted in size, and the particle size of the material can be controlled by adjusting the size of the discharge port.
• The adjustment range of the discharge port of the jaw crusher is generally between 10~300mm, and the specific range may vary depending on the model and specifications.
• The width of the discharge port can be changed by manually rotating the bolts on the discharge port or adjusting the wedge.
Jaw crusher is suitable for processing various materials with a particle size not exceeding 1200mm and a compressive strength not exceeding 320MPa.
Ore: such as granite, quartz, river pebbles, calcite, dolomite, iron ore, silica ore, basalt, etc.
Rock: including rocks of various hardness. Because of its large crushing ratio and uniform product particle size, it is particularly suitable for the initial crushing of large rocks.
Construction waste: such as concrete fragments, bricks, construction waste, etc., which can be crushed into recycled aggregates or recyclable materials.
Industrial raw materials: such as limestone, marble, etc., these materials are widely used in many industrial fields, and jaw crushers can effectively handle and meet their processing needs.
PE250*400 jaw crusher: the configuration model of 10-ton production line, single machine output 5-21t/h, maximum feed particle size 210㎜, discharge opening adjustment range 20-60㎜;
PE400*600 jaw crusher: it is what we often call 46 jaw crusher, can be used in 30t/h production line, hourly capacity 16-64 tons, maximum feed particle size 340㎜, discharge opening adjustment range Adjustment range 40-100㎜;
PE-500*750 jaw crusher: 57 jaw crusher, 40-110 tons per hour, used for 50t/h crushing production line, maximum feed 425㎜, discharge port adjustment range 50-100㎜;
PE600*900 jaw crusher: 69 jaw crusher, commonly used in 100-ton production line, maximum feed particle size 500㎜, discharge port adjustment range 65-16 5㎜, processing capacity 50-160 tons per hour;
PE750*1060 jaw crusher: can be used in production lines with an output of 200 tons per hour, with a capacity range of 110-320 tons per hour, a maximum feed size of 630㎜, and a discharge opening adjustment range of 80-140㎜;
PE900*1200 jaw crusher: used in 300-ton production lines, it is a very common model and a medium-sized model in the entire jaw crusher series, so it can be used in many production lines, with an output of 220-380 tons per hour, a maximum feed of 750㎜, and a discharge opening adjustment range of 95-165㎜;
PE1200*1500 jaw crusher: suitable for large-scale production lines with an output of 500 tons per hour, a single machine with an output of 400-800 tons per hour, a maximum feed of 1020㎜, and a discharge opening adjustment range of 150-350㎜.
FAQ: How to choose a suitable jaw crusher ?
1. what is the raw material you want to crush ?
2. what is the input size of your raw stone ?
3. what is the capacity per hour do you need ?
4. what is the output size do you need ?
Answer:
these are normal qustions about jaw crusher
For example:
PE150x250 jaw crusher
input size: < 125 mm output size:10 - 40 mm
capacity:2 - 6 ton per hour power: 7.5 kw
PE200x350 jaw crusher
input size: < 160 mm output size:10 - 50 mm
capacity:6 - 10 ton per hour power: 7.5 kw
PE250x400 jaw crusher
input size: < 210 mm output size:20 - 60 mm
capacity:8 - 16 ton per hour power: 15 kw
you can check the parameter below.
Customer Case-01
In June 2023, a construction company from the Indonesia found our promoters, because they were about to carry out a road construction project and hoped to crush the granite raw materials (250 mm to 500 mm) into sizes of 1-5mm and 5-10mm 10-20mm, and due to the large amount of work, it is necessary to crush 150t/h of granite.
Based on the customer's information, we had customized granite crushing solutions for customers, including jaw crusher, cone crusher, sand Making Machine, and YK vibrating screen.
We choose the PE-600x900 model for coarse crushing, which fully meets the customer's demand for output. We add cone crushers and sand-making machines to the secondary and tertiary crushing equipment to optimize product particles and finally obtain high-quality finished products.
Customer Case-02
This is a 600x900 jaw crusher production line in Zimbabwe, with a capacity of 100-150tph, used to crush limestone, river pebbles, iron ore, etc. A complete crushing production line not only includes a jaw crusher but also requires other equipment to assist in the entire crushing, screening, transportation, and other processes.
In a tropical climate country like Zimbabwe, the heat resistance, corrosion resistance, and maintenance convenience of the equipment are particularly important. In addition, considering the possible power instability problem, the production line also needs to be equipped with corresponding power protection and emergency measures.
About wearing parts
The accessories and wearing parts of the jaw crusher are crucial to the normal operation and crushing efficiency of the equipment. In daily use, special attention should be paid to the protection and maintenance of these parts and worn or damaged parts should be checked and replaced in time to ensure the long-term stable operation of the crusher.
The wearing parts of the jaw crusher include a toggle plate, side guard plate, fixed jaw plate, movable jaw plate, toggle plate lining, etc. The jaw plate is the main working part and bears a large impact and extrusion force, so the wear rate is relatively high. Powerful, wearing parts need to be replaced regularly, choose wear-resistant materials to increase the life of the equipment. Terbaik machinery is made of high manganese steel, which has good casting performance, wear resistance, and increases the stability of the equipment.
About delivery standards
Terbaik machinery has extremely complete delivery standards, a series of standards and regulations formulated to ensure that the ordered goods can be delivered completely and accurately according to the needs and requirements of customers. These standards usually involve quantity, specifications, quality, packaging, documents and time, etc., to ensure the smooth progress of the delivery process and improve customer satisfaction.
+86-19139706301
+86-19139706301